When John Jaquish developed the bioDensity machine, he had no idea of the
commotion it would create in the fitness community. bioDensity is the physical
training machine that works to build strength and density of muscle, bone, and
joints, and it’s far from your regular weight training. John tapped into the
power of high-impact training, and ever since he’s been helping others around
the country use natural adaptation of the body to achieve unbelievable results.
I personally have tried his machine, and was able to run over 1000 pounds
through my lower extremities without discomfort. Naturally, I wanted to glean
some insider tips on how health nuts as well as the average citizen can take
advantage of this amazing top-of-the-line technology. He was generous enough to
share some absolutely fascinating information on how you can build muscle in 20
seconds per week, put 1000 pounds on your lower extremities and dramatically
increase your functional strength.
Full Transcript #
I have with us to today John Jaquish, he’s the CTO at BioDensity. BioDensity is
this really amazing technology that—it’s like a weight-lifting machine but on
steroids. But on steroids as in the figurative sense, right? What this
technology does is it maxes out your muscle strength so that with just a small
range of motion, you max out your muscles to a level you’ve never experienced
before. You do that for a small number of seconds and that just tears down the
muscles. I’m not being very scientific in my explanation, John can give us a
more technically correct explanation of how this works. It builds muscle density
instead of just adding volume to the cell. So when you stop working out for a
week or a month or whatever, normally you lose a lot of muscle because a lot of
that volume of the cell. But when you build muscle density, it’s a different
ballgame all-together. And this machine builds bone density as well. It adapts
to the strength of the person and an elderly person who is suffering from
osteoporosis can use the machine to build bone density. It’s pretty amazing
technology. I found out about it through Tony Robbins, I’ve been in his Platinum
Partnership, it’s this exclusive club of really cool people who travel the world
with Tony and It’s been a lot of fun. We also get access to some really cool
tools, technology, and information. Tony for example shared with his Platinum
Partners at least six months prior to the housing market crash in 2007 that “hey
this is coming”. A lot of folks got out of real estate in the nick of time. So
that’s how valuable that the information is that you get from the Platinum
Partnership. And biodensity was something that Tony was so enthralled with that
he even participated in the company, that, John can tell you more about that.
I’ve seen the biodensity machine being exhibited at the ‘Unleash the Power
Within’ event in the lobbies. Tony actually has in each of his homes a
biodensity machine. I’ve had the pleasure of being able to try one of these
things out, It’s pretty amazing. Without any further ado, let’s bring John on
the call here, he can tell us a bit more on his background and biodensity and
how it all works! Welcome, John!
Stephan, thanks! That was a pretty good intro!
Thanks, well correct any inaccuracies I might have, but I tried to use my
understanding of it.
Well, getting introduced to the biodensity machine through Tony Robbins is a
very different experience to how you normally would be introduced to it. So, it
was developed to treat osteoporosis. We learned about the muscle implications
later. So really where this device came from was my mother was diagnosed with
osteoporosis. She was very distraught about it, and was very concerned that she
was going to fracture a bone and it would end her life through complications.
Osteoporotic fractures actually end as many lives as breast cancer does. A lot
of people don’t know that.
It’s a tremendous problem. But other than some pharmaceuticals that have some
side effects which are worthy of consideration, other than that, there are few
options that can affect the disease and treat the disease and potentially
reverse the disease. When my mother told me this, I started reading about bone
and how bone works and uptake minerals and recalcify to increase their density,
the density around the nuclei of these cells. What I came to was compression
through high impact force. Gymnasts, they load their body with between 10 and 20
multiples of bodyweight when they dismount from uneven bars. That’s the highest
drop that the gymnast will go through, and so they absorb these tremendous
forces and their bones adapt as a result. Now, I’m not going to tell my
65-year-old mother to become a gymnast. But how do we get the benefit of impact
without the risk of impact? That was the catalyst for my creating the device. I
created a prototype, tested it on my mother, and within 18 months, she was back
to healthy bone, but interesting, this is how Tony Robbins got involved. My
mother was one of the first people to test it, and I ran out of a test facility
with 400 test subjects out of California, Napa Valley. And so everyone in the
test group found that their functional strength changed dramatically. Improved
dramatically. For example, my mother, like a lot of women in their 60s, would
garden. She would be there sometimes in her garden working soil, and sometimes
she would grab these 50 lb. bags of soil or tried to and couldn’t pick them up,
so she’d ask me to move around these 50 lb. bags. So one day after beginning
using biodensity, I saw her out in the garden carrying one 50 lb. bag in each
There are few options that can affect the disease and treat the disease and
potentially reverse the disease. Oh wow.
And that’s not normal for a woman in her 60s. That’s not normal for anyone.
Because they’re hard to hold onto; keep in mind that these things don’t have
handles, this is just a plastic bag. And I walked out and said “Mom, when did
you get the ability to hold one of those things?”, and she wasn’t even aware
that she was doing it. Normally she would come to get me, but she didn’t even
think about it, she just picked it up. She said “Oh my goodness, I didn’t know I
could do this!”. I started looking at these anecdotal reports from these test
subjects, and we were looking at their bone, but their functional strength was
changing. One of the people in the test group said “I know Tony Robbins. I’m of
an age and level of where I used to be in shape”(this is one of the test
subjects talking)” I don’t feel like there’s any options for me because there is
pain all over my body. But now I’m so much stronger that I’m going to share this
with Tony Robbins”. I had a lot of people saying that they knew someone
influential and thought “Yeah, okay”. But this guy really did know Tony! Sure
enough, Tony called. That’s how it happened. Tony was much more interested in
the muscular applications than the bone, so that’s how he came to be an
investor. The first device he got in his house was actually a prototype, it
wasn’t even a production unit, and we went from there. Tony’s improved his
ability to produce force. In neurology we look at the amount that someone can
produce force, it’s called force production. It’s not just a measure of
strength, it’s a measure of how much muscular energy one can recruit at maximum.
And also that’s a measure, because of the way we’re using it, through bone
compression, as a measure of bone performance. It’s these measures that we’re
publishing research on, I was published last year in Osteoporosis International
about axial-loading in bone. And then this latest time on functional bone
performance, which is sort of a dynamic look at bone density because really when
Stephan you would use the system and put over a thousand pounds through your
upper extremities, I watched you do it.
Yeah, that was pretty cool.
Yeah, pretty cool! No way you could put 1000 lbs safety on your upper
extremities without the use of this device. We’re seeing a neurological event.
You can produce enough muscular tissue to be able to produce that force. So one
of the greatest recruiting events you’ve ever been through. The tendons and the
ligaments and the joints and what’s called the joint capsules, when they receive
compressive force, they adapt in fibrocartilage. They uptake minerals and they
actually do something similar to what the bone does and make that bone stronger.
A lot of people with joint pain can reduce that joint pain and make it better
because the density they’re creating within the joint. We also know that your
bone mass could comfortably absorb that 1000 lbs because you voluntarily created
So the really cool thing in addition to being able to utilize your body in ways
never possible before safely, it’s like your body knows where to stop so it
doesn’t harm itself. I think you told me that if you take your thumb and put it
between your two fingers and you squeeze, there’s a point where you’re not going
to be able to squeeze any harder before your brain says “Nope, not going there”,
because that would actually break my thumb. There’s a similar situation where
your brain does not want you to go to a point where you’re going to hurt
yourself with this machine, is that correct?
That’s right, you’ve got it. The physiological process is called neural
inhibition. Basically when you squeeze a fist, you can’t break your own finger
because at some point enough force goes through your hand when the bones start
to feel uncomfortable and the central nervous system’s limiting the muscle that
can be switched on so nothing can go wrong. So all of a sudden you’re reaching
towards a stove, provided that you don’t slap your hand down in an uncontrolled
moment you’re reaching toward a stove and you feel the heat and you realize the
stove is on, your reflex will pull away immediately, you don’t even have to
think about it. So as you’re loading the body and getting to a level of force
that may seem dangerous, it’s really not, because your central nervous system
will stop the production process before anything bad would happen.
As you’re loading the body and getting to a level of force that may seem
dangerous, it’s really not, because your central nervous system will stop the
production process before anything bad would happen.
When you’re doing this exercise, you get to a point where you max out your
muscle and you hold that limit for how many seconds? It’s not very long, if I
Just five seconds.
So four movements, 4 exercises, 5 seconds apiece, so literally in 20 seconds
you’ve got a week’s worth of workout-like weigh-lifting workout done.
I don’t know if I’d liken it to weightlifting, because it’s providing a
different stimulus and a different adaption.
So would you continue to lift weights and use the machines at the gym to
continue to augment the use of the biodensity machine?
Do some folks replace their weightlifting with the biodensity machine?
Yes. That’s what I do, I don’t lift weights.
And you’re really buff, you’re built!
So you built that and you maintain that with the biodensity machine. That’s
cool. So Tony uses the machine, how often would Tony or the typical user use the
machine, or what’s typical?
Once per week.
I know there’s like a technology element, with internet connected server and so
forth. Can you explain how that works and why it’s connected to the cloud and
what the benefits are to that.
It’s a cloud-based system so everyone can take advantage of the normative data.
When you use it you are compared to other males your age who have used it as
many times as you have. So you are compared with very like individuals, it’s
important to point out. There’s no point in comparing someone in their second
session to someone who’s used it 40 times. There’s no point in comparing you to
someone who’s older than you or younger than you. And that’s an ongoing
database, so every session that’s done modifies those normatives on that
So if you could tell us a bit more on how this machine differs in how it builds
muscle versus the traditional approach of bodybuilders to use free weights and
all that. I alluded to it in the beginning, with you know the volume of the cell
instead of the density of the muscle fibers, could you elaborate on that?
When an individual lifts weights, when you go to the gym and lifts weights,
you’re exhausting the fuels in the muscle cell. Let’s say you’re doing a set of
bicep curls. first you run of ATP, adesine triphosphate, then glycogen, then
creatine phosphate. Once you run out of those fuels, you drop the weight and
blood comes rushing to the muscle and oxygenates the cells. Coming with that is
more glycogen, which gets proscessed with the insulin receptors (or glucose I
should say) and becomes glycogen, creatine, phosphate, and more ATP. So we all
know what that feels like. You do a set of pushups and your arms feel kind of
tight. Biodensity doesn’t do any of that. The body is doing that because you’ve
exhausted all the fuels in the muscle so the central nervous system triggers an
adaptation to hold more fuel in the muscle. What biodensity does instead is
getting the body to go to, or the muscle, to go to kinetic fatigue instead of
for a fuel supply reason, the fatigue point doesn’t have anything to do with
fuel, it has to do with contractile property. You’re engaging the muscle to its
fullest degree. When you put a person in a situation where they absorb impact,
all of those muscles, tendons, ligaments, and bones are optimized. You’re in the
best position. Which is why your reflexes choose those position to absorb
high-impact force. In those positions, the exhaustion has to do with a lack of
structure to continue the contraction. If you remember the SAID principle from
bio class in high school, remember that? Specific Adaptation for Imposed Demand.
So basically, you’re not going to build a callus on your hand from hanging out
in the sun. You’re gonna suntan from hanging out in the sun. The adaptation is
specific to whatever you’re doing with the body. So what you get is called a
sarcoplasmic effect in the fuel, like I was talking about with bodybuilders or
recreational weightlifting. You exhaust the fuel out of the muscle and then
trigger the body to hold more fuel. A body that’s trying to compound this, and
that’s pretty much how everybody lifts weights. But if you fatigue the muscle
from a structural standpoint, the adaptation must be specific to an imposed
demand. So the adaptation is more structure inside of the muscle. So protein
synthesis takes place, acting proteins merge to form a new myofibers. So the
actual tissue, the density of the muscle becomes greater, thereby increasing the
number of insulin receptors, and thereby instantaneous power that the muscle is
capable of. Now, this is a functional change. This is a change in the amount of
tissue you have as opposed to the amount that your tissue is holding. You were
saying that someone can take a break from their therapy for six months and not
really lose anything, and that’s interesting.
When you go to the gym and lift weights, you’re exhausting the fuels in the
muscle cell. Yeah. You mentioned there are four specific exercises, four
movements. And the range of motion is pretty small, I remember getting in the
machine and doing what I guess is the equivalent of a chest press, and I just
went from almost fully extended to fully extended. Just mere inches in
difference from the start to the end position, and just using my full force to
get to the maximum. That was a heavy load, but I didn’t feel like I was
straining things unnaturally. Tell us a bit more about that. What are the four
movements, and what is the range of motion of those movements? It’s just mere
inches from beginning to end.
First movement is upper extremities. If you were to trip and fall, you’d put
your hands out in front of you and brace for impact. Your hand would be aligned
with the clavicle, and there’s be 120 degree of inclusion between the lower arm
and the upper arm. Second movement, lower extremities. 120 degree angle behind
the knee in a leg press type format. But you just short of walkout, so you’re
going from 120 degrees to 150 degrees as you go through the compression, and as
you’re saying you just sort of straighten out, you’re actually able to compress
bone. There’s actually a cool picture on the biodensity website that shows axial
bone compression on a post-menopausal woman. She was one of the test subjects in
the study. You can see her putting 10 multiples of her own bodyweight through
her lower extremities. It’s really important to point out when I speak at
medical conferences I point that out right out of the gate, so someone realizes
we’re not talking about weightlifting. We’re talking about something totally
different. 10 multiples is something that not even athletes can pull off. The
only activity where you do that is high impact. So it’s the benefit of high
impact without the risk.
And this is something that all people all ages, all genders should be using the
machine and maximizng their capacity in this way because it will futureproof you
from falls, osteoporosis, due to old age and stuff. Even if you are already old
and frail, you can safely use this technology to add bone to kind of reverse
some of that damage.
You mentioned your site already, its biodensity.com, What sort of resources
could one find at your site? You mentioned some research that you published,
would that be where they would go to read those research articles?
The website is written so that a patient can understand what’s going on as well
as a physician who might want to add biodensity to their practice, they can look
at it in five minutes and understand what they need to do and how it works and
how they need to go about applying the practice. But if someone wants to read in
depth, the study is on there.
So different practitioners are looking into bringing in your technology for
their patients. What kind of practitioners, are we talking chiropractors,
personal trainers, gyms, what sort?
Typically clinics which have a physician referral relationship, they might be
run by entrepreneurs, but they have a physician referral background. There’s a
group called Osteostrong, that has 13 locations, maybe more than that now, maybe
20 locations now. They’re growing very fast, they’re like a franchise
opportunity. It’s great. It’s a small space, kind of a waiting room, they have
biodensity, people come in, I believe its 90/mo, they track your progress, they
give you your performance report and do a little analysis there and the waiting
room has a couch and video screen playing testimonials from that specific
location so you can understand what’s happening to people when they go through
it, which is, it’s a tremendous place, there’s a lot of energy in that location.
There is a chiropractic firm called Be Strong for Life; they take an approach
where they take pre and post x-rays and look at the alignment of the spine
through biodensity therapy. They have been nice enough to share some pre and
post x-rays where you can see spinal alignment happening. Keep in mind this is
without a chiropractic adjustments and without traction. This is the body
realigning itself as a result of that therapy. That’s something that the general
public isn’t really aware of how that affects their health. They’re really
champions of that education. Most people walk into a chiropractors office
because they are in pain. Because they want better alignment and better
breathing and better neurological function as a result. But the patients at
those facilities end up getting that benefit and its tracked through xrays. And
there’s many others. There’s 240 locations in the United States where different
physicians and different entrepreneur groups have different devices and people
can come and use them .
There are also people who bought the device just to put in their own home, but
it’s expensive, right? How much is the device?
If you want one in your living room, that’s terrific. But it’s $45,000.
You probably have a Lamborghini in your garage too, right?
I think for people that the time is that valuable, and they obviously have the
disposable income and space to put it. That it becomes a very worthwhile
I mean your health is worth everything. And for folks who are in a city
environment, not in the middle of nowhere, hopefully there’s a biodensity
machine that you can join, get membership to, and use the machine there.
There’s actually a location finder on the website.
So I’m in Santa Monica, I believe you told me there are some machines in the LA
There’s one in Santa Monica! Great facility. Called “Project Rewire”.
I’m already there. I’m going to set that up for this weekend.
Do it! I recognize the gentlemen who runs the facility, he and his wife, they
would, used to speak at Platinum Events. Tony Melina and Valorie Melina. Oh
right, you know them. So they decided to go ahead and start a biodensity
business, or add biodensity to their existing wellness business. They have an
amazing business where, it’s called “Fear Extinction” so they use biodensity as
well as a lot of other tools to get people to overcome some mental barriers by
overcoming what they perceive as physical barriers. I’m probably not doing it
quite the justice it deserves. But you’ll enjoy going to that facility for sure.
Awesome, well I will do that! Just to wrap up this conversation, what would be
one final bit of wisdom or parting knowledge you can give to our listeners.
We’re talking to high school kids, it’s stay in school, we’re talking to adults
is compound interest is really important.
In relation to what we’ve been talking about. Just something health related. So
many people are focused on fixing something that has symptoms, instead of
maintaining wellness before the problems crop up.
Right. You’ve put it in my mouth. The answer is, really, to not be reactionary,
but plan. Plan for your health in the future. When you do that, you make some
decisions. Going to the gym isn’t necessarily about looking good, though that
might be a result. Or, using biodensity might not necessarily be about your
long-term health, it might be about looking good. Being a healthy individual,
eating the right things, putting the right amount of force through the body, can
provide you benefit for your entire life. It’s not just a priority the day after
New Years. It should be a priority every day.
Well thank you, John. That was John Jaquish, CTO and inventor of biodensity, a
technology you absolutely have to check out. Thank you listeners, and we’ll
catch you next time.